Bluetti EP500/EP500Pro Solar Power Station | 2,000W/3,000W 5,100Wh

Key Features:

• 5100Wh LiFePO4, 6000+Charge Cycle
• EP500Pro: 3000W Pure Sine Wave Output
• EP500: 2000W Pure Sine Wave Output
• Movable Power Station
• In-grid UPS Mode&Flexible UPS Mode(24/7)
• Off-grid Energy Storage
• Multiple Devices Can Be Loaded Simultaneously
• Flexible Recharging Way To Keep Your EP500 Always On
• App Remote Control
• Smart Touchscreen

All-in-one Backup Power Station

The BLUETTI EP500PRO is shipped with a ground-breaking 5100Wh LiFePO4 battery pack and a 2000W rated (3000W for the EP500 Pro) pure sine wave AC inverter. This class-leading power station brings you the power to run your entire party, family camping trip, cabin workshops, or even your whole house for a day or two in the event of an unexpected outage. Up to 15 outlet sources allow you to power anything from laptops and air conditioners to your electric vehicles without breaking a sweat.

Safe, Smart, And Continuously Evolving

The advanced Battery Management System and LiFePO4 chemistry bring the EP500PRO incredible safety and durability. With the built-in dual-core microcomputer and Internet connection, the EP500PRO’s firmware can be upgraded through your internet connection. There is no best, only better!

Seamless UPS Backup

The EP500PRO will automatically become your home energy source for essential loads when the electrical grid goes down. Unlike gasoline generators, BLUETTI EP500PRO keeps your lights on and laptops charged without upkeep, fuel, carbon monoxide or annoying noise. Pair with up to 1200W MPPT solar input to rapidly recharge or to keep your appliances running without depleting the onboard battery. Remember when you had to worry about a power outage? Worry no longer, Meet BLUETTI EP500PRO.

How to use the EP500/EP500PRO

Designed as a flexible power station to meet various scenarios, the EP500 Series has different usages.

Videos

In-Grid UPS Setup Guide

1)For non-solar-powered household circuits: An electrician with a professional technician certificate is required to install the in-grid power system, connect the wires of critical equipment from your main electrical box to the BLUETTI UPS BOX. When the power fails, it will automatically switch to EP500 or EP500 Pro for the power supply. The connection method: power grid--home main circuit--BLUETTI UPS box--EP500 or EP500Pro--critical equipment (such as refrigerator, electric light, and server). 2)Solar-powered UPS: a.If the open-circuit voltage of the solar panels is within the specified input range of EP500, they can be directly connected into EP500 or EP500Pro through the MC4 port connectors to build up the UPS system. b.If the open-circuit voltage of your panels exceeds the input limitation of EP500 or EP500Pro, they need to pass the "PV step-down module" to decrease the voltage before connecting into the system. The connection method is solar panels--PV step-down module--EP500 or EP500Pro--critical equipment (such as refrigerator, electric light, and server).

Why is there a limitation on the power of the equipment loaded by the US version of EP500 or EP500Pro in the mobile UPS mode?

When EP500 or EP500Pro is plugged into a home wall outlet, the power output will be limited by the current of the wall plug. The power of output is subject to: If your home's socket features 120V/15A, the equipment carried by EP500 or EP500Pro cannot exceed 1800W. If your home socket features 120V/25A, then EP500 load equipment can be no more than 2000W, and EP500Pro can be 3000W for safety.

Can I change the working mode of EP500 or EP500Pro to work as a mobile UPS after the EP500 connected to the home grid?

Yes, you can. Turn off EP500 or EP500Pro first, and then unplug the cable on it, remind to set the Max. Grid Current to 15A.

What is the UPS switching time?

There are two types of working conditions of UPS for EP500. No delay for online UPS.;20ms from standby UPS.

How much is the loss of AC and DC?

In standby state: less than 10W, AC_ON & DC_OFF: less than 20W, AC-ON & DC_ON: less than 25W

After the stated 6000 battery cycles, how much capacity is left in EP500 and EP500 Pro?

EP500 and EP500 Pro can maintain above 50% capacity after 6000 cycles.

What's the frequency?

60Hz: US, Canada 50Hz: Europe, UK, Australia Frequency 50/60Hz cannot be switched.

What should Ido if the solar panels on the roof of my house exceed the open circuit voltage requirement?

You can reduce the open-circuit voltage by ordering a BLUETTI PV Voltage Drop Modular. Doesn't require changing the original installation and connection method of solar panels in your house. Through this modular, the open-circuit voltage of roof panels can be matched with the input specs of EP500/EP500Pro

Can I use third party solar panel and what conditions need to be met?

Yes, you can. However, it must meet: 1)Open Circuit Voltage(OCV): EP500: 55-145V/Max.20A, Max.1200W. EP500Pro: dual MPPT，each is 35-150V/Max.12A,1200W Max. (2400W Max. For dual connection). 2)Suitable MC4 connector. 3)We recommend that the solar panels to be connected should be of the same brand.

Are there any restrictions on the use of the 100W USB-C port?

The charging power will work at only 60W at most instead of 30W if the USB-C cable does not have 5A MFI certification.

After the DC port of 12V30A is opened, can the other DC ports be used?

No, for the 30A large-current, the other ports besides 12V/30A RV ports won`t work. In addition, you must cover the rubber plug when the DC is turned on and the 12V/30A port is idle , otherwise it may cause a short circuit if the cable falls in.

Note on the output power of the Split Phase Bonding Function.

1) There is only one AC port marked 4000W/220-240 (or 6000W/220-240) on the Split Phase Fusion Boxes that can power the High-voltage devices. Other 6 AC ports cannot load more than 2000W on EP500 (3000W on EP500Pro). 2) Under Split Phase Bonding mode, the total load power of all AC ports (on the machine and Split Phase Fusion Boxes) can not exceed 4000W for EP500 (6000W for EP500Pro).

If one of the EP500(or EP500Pro) is out of power, does the Split Phase Bonding Function continue to work?

If any one of the two EP500(or EP500Pro) runs out of power, the high-voltage output ports on the Split Phase Fusion Boxes will stop outputting power. The machine which still has the power needs to be set to ”Single Phase” mode manually.

Does the Split Phase Bonding Function apply to one EP500 and one EP500 Pro?

No. Only applicable to units of the same model and specifications. For example, two EP500 or two EP500Pro are recommended. Besides, the Split Phase Fusion Boxes also are different.

Can it connect to the BLUETTI B230/B300 expansion batteries?

Yes. You can connect it with B230/B300 battery with the DC input cable and P090D to MC4 cable*. * Sold separately.

Does EP500Pro support App control?

Yes. Once connected via WiFi or Bluetooth, the BLUETTI App will enable you to control the EP500ProPro remotely, like switching the working mode and upgrading the firmware.

Can I use EP500Pro as a UPS?

Yes. It supports four UPS modes: 1. Standard UPS. 2. Time Control UPS (Pay less for higher electricity consumption). 3. PV Priority UPS (Recommended for regions with sufficient solar energy). 4. Customized UPS.

How do I connect this to my home main panel?

BLUETTI recommends a competent and trained licensed electrician undertake the task. Connect the wires of critical equipment from your house electric panel to BLUETTI Smart Home Panel*. Then connect EP500Pro to the Smart Home Panel. * Sold separately.

What is the UPS switching time?

There are two types of working conditions of UPS for EP500Pro system. 1) No delay for online UPS; 2) 20ms from standby UPS.

What is the maximum input charging power of the BLUETTI EP500Pro?

4,000W Max.

How can it reach 3,000W AC recharging?

Plug it to a 30A wall socket with the 30A AC charging cable*. * Sold separately. (Click here to learn more.

What kind of solar panels should I choose for EP500Pro?

PV input requirements for EP500Pro: Open Circuit Voltage: 35-150V Input Power: 2,400W Max. Include MC4 connectors. Highly Recommended: 6x BLUETTI PV120: ≈8hrs*. 5x BLUETTI PV200: ≈6hrs*. 3x BLUETTI PV350: ≈5.5hrs*. * For reference ONLY.

Can I use my solar roof to charge the EP500Pro?

Yes, but please note your solar roof should have: 1. NO micro-inverter 2. an open-circuit voltage of 35-150V 3. MC4 connectors However, when the OCV falls in 150-550V, you can also use BLUETTI D300S* to step down the voltage and achieve solar charging. * Sold separately.

Can I connect two EP500Pro together for more power (240V Split Phase Bonding)?

Yes. With the Fusion Box (P030A), you can connect two EP500Pro in series for 240V/6,000W output.

Can EP500Pro connect with EP500?

No. Only EP500 to EP500, or EP500Pro to EP500Pro is acceptable.

Can it charge and discharge at the same time?

Yes.

How do I know whether my appliance can work well with the EP500Pro?

Calculate the total wattage of your devices. EP500Pro should work if the load doesn't exceed its rated 3,000W.

How long can it run my device?

Running time = Battery capacity × DoD × η ÷ Device rated power DoD refers to Depth of Discharge and η is local inverter efficiency. For EP500Pro, both DoD and η are 90%. If you run a 1,000W microwave oven with it, the running time will be: 5,100Wh × 90% × 90% ÷ 1,000W ≈ 4.1hrs Note: 1) The formula is NOT suitable for inductive loads with compressors, like refrigerator, air conditioner, etc. 2) The above data is for reference ONLY.

Is the EP500Pro power station waterproof?

No. Also, please do NOT store it in a humid environment for a long time.

When I keep the power plugged in, will EP500Pro stop charging automatically when fully charged?

Yes. And when the SOC is less than 100%, EP500Pro will automatically charge again without damage to the battery.

Is it possible to replace the built-in battery?

No. If the internal battery pack is faulty or even dead, please contact BLUETTI Customer Service.

How is it different from the EP500?

The main differences are: 1) Output power: 3,000W AC power for EP500Pro, while 2,000W for EP500. 2) Solar Input: 2,400W for EP500Pro, while 1,200W for EP500. 3) AC Input: 3,000W for EP500Pro, while 600W for EP500. 4) Output Port: EP500Pro has one more 100W USB-C port and 1 NEMA L14-30 port. 5) Recharging: EP500Pro supports charging from car cigarette lighter and lead-acid battery, while EP500 doesn't.

How is it different from the AC300?

The main differences are: 1) Battery: AC300 has no built-in battery and must work with B300, while EP500Pro connects with B300 only for capacity expansion. 2) 30A AC Output: EP500Pro has an L14-30 port while AC300 has a TT-30 port. 3) Maximum Input: 5,400W for AC300 with two B300, 3,000W with one B300, while 4,000W for EP500Pro. 4) Weight and Dimensions: AC300 is smaller.

Documentation

BLUETTI EP500 Solar Power Station

General
AC Rated Power:	2000W, 2000W< load< 2500W, 2min, 2500W< load< 3000W,10s, 3000W< load<4800W, 500ms, (peak 4800W)
Net Weight:	≈76kg (167lbs)
Dimensions:	500*300*760mm (22.8*11.8*29.9in)
Battery Capacity:	5100Wh
Battery Cell Type:	LiFePO4
Rated Life Cycle:	3500+ Cycles to 80% Capacity
Charge Temperature:	0°C ~ 40°C (32°F ~104°F)
Storage Ambient Temperature:	0°C ~ 45°C (32°F ~113°F)
Working Environment humidity:	10-90%
Certification:	PSE, FCC, CE, UN38.3, msds, UL, SAA and ROHS
Warranty Period:	60 Months
Color:	Superior Grey, Elegant White

Input Specs
AC Input:	600W Max, 100-264VAC
PV Input or T500 Input:	1200W Max, 55-145VDC, 20A

Output Specs
USB-C:	1*100W
AC:	220-240VAC*3, 100-120VAC*4
USB-A:	2*Quick Charging, 36W Total, 2*5VDC, 3A Total
Cigarette Lighter:	1*12VDC, 10A
RV (Aviation Port):	1*12VDC, 30A
DC 5521:	2*12VDC, 10A Total
Wireless Charging Pad:	2*5/7.5/10/15W

BLUETTI EP500Pro Solar Power Station

General
AC Rated Power:	3000W, 3000W< load< 3750W,2min, 3750W< load< 4500W, 5s, 4500W< load< 6000W, 500ms, (peak 6000W)
Net Weight:	≈83kg (182lbs)
Dimensions:	500*300*760mm (22.8*11.8*29.9in)
Battery Capacity:	5100Wh
Battery Cell Type:	LiFePO4
Rated Life Cycle:	3500+ Cycles to 80% Capacity
Charge Temperature:	0°C ~ 40°C (32°F ~104°F)
Storage Ambient Temperature:	0°C ~ 45°C (32°F ~113°F)
Working Environment humidity:	10-90%
Certification:	PSE, FCC, CE, UN38.3, msds, UL, SAA and ROHS
Warranty Period:	60 Months
Color:	Elegant White

Input
AC Input:	3000W Max
PV Input or T500 Input:	2400W Max, 12-150VDC,12Ax2, 12V/24V,8.2A

Output
USB-C:	2*100W
AC:	100-120VAC*5
USB-A:	2*Quick Charging, 36W Total, 2*5VDC, 3A Total
Cigarette Lighter:	1*12VDC, 10A
RV (Aviation Port):	1*12VDC, 30A
DC 5521:	2*12VDC, 10A Total
Wireless Charging Pad:	2*5/7.5/10/15W

EP500/EP500Pro

*Select type

1 x

AC Charging Cable

1 x

PV Charging Cable

1 x

Warranty Card

1 x

User Manual

1 x

Click on any accessory below to view the full details and add it to your cart

Bluetti PV350 Solar Panel | 350W Foldable Panel

Full details