EcoFlow 100W Flexible Solar Panel

Extremely Light
At only 5.1lbs (2.3kg), this flexible solar panel is easy to move and install, barely adding any weight to your vehicle. Flexible solar panels are perfect for roofs that can only support a light load, such as tents and awnings.

Flexible
Its adaptable design can fit a multitude of curved surfaces, making it ideal for mounting on RVs, van roofs, and boats.

Weatherproof
With a waterproof level of IP68, the flexible solar panel can be used in all weather and can withstand dirt, dust, debris, and low-pressure water jets.

Universally compatible
The 100W flexible panel includes a 3.3ft charging cable that gives you plenty of space to position each panel, maximizing solar input. With an all-inclusive solar connector, the 100W rigid panel works with other 3rd party solar systems and power stations.

100W Flexible Solar Panels
Our lightweight, flexible solar panel is designed to perfectly fit the curvature of a van roof or RV. Mount and fast charge your Power Kits system or portable power station.

Made from Highly Efficient Monocrystalline Cells

Charge Faster with High Solar Conversion
Our 100W flexible solar panel has an excellent efficiency rating of 23%, allowing you to charge even faster. The panel’s integrated bypass diodes prevent overheating while maintaining cell performance even in shaded environments. Combine as part of your Power Kits setup or EcoFlow portable power station, and the integrated MPPT algorithm optimizes your solar input.

Use the Pre-cut Eyelets to Fit Our Panels as You Wish

Choose Your Way to Install at Ease

With pre-cut eyelets, the flexible solar panel can be hung with hooks or can be securely attached to a surface using an adhesive.

Solar Cable for Universal Compatibility

Add Up to Your Solar and Power Systems
With an all-inclusive solar connector, our 100W flexible solar panel can be even used with your existing 48v power system or portable power station. This panel includes a 3.3ft solar cable that gives you plenty of space to mount multiple panels, maximizing solar input.

Why does the 100 W Solar Panel fail to deliver as much as stated when in actual use?

In most cases, it is normal for a solar panel not to deliver its full nominal power. Some of the reasons why this happens, as well as some suggestions for getting closer to the nominal power figure, are given below. 1. Light Intensity. The amount of light shining on the panel will result in fluctuations to the power output. You are more likely to achieve nominal power output figures closer to those obtained under test conditions when using the product on a clear day during the midday sun, than when using the product in the morning or later in the afternoon. Weather conditions will also affect the amount of sunlight that shines on the panel. For example,you are much less likely to achieve the figures for nominal power in hazy, cloudy or rainy conditions. 2. Surface Temperature. The temperature of the solar panel surface will also affect the amount of power generated.The lower the surface temperature of the panel, the more power will be produced. For example, solar panels generate more power when used during the winter than during the summer, and this is completely normal. Solar panels generally reach temperatures close to 60 °C (140°F) during summer. This reduces nominal power by 10–15%, despite the higher levels of light shining on the panel. 3. The Angle of the Sunlight. Under good lighting conditions, the solar panel is able to stay where light hits perpendicular to the surface to achieve better light performance. However, most solar panels installed on the roof of an RV can only be installed in a tiled configuration, which prevents the panel(s) from being installed at the optimal angle, and this difference will result in a power output loss of approximately 5%-10%. 4. Panel Shading. The surface of the solar panel should not be shaded during use. Shading caused by shadows,foreign objects and glass can all greatly reduce power output.Performance Issues caused by Malfunctioning Panels: If the panel still isn't generating power or its output remainsfar below expected nominal power figures after addressing the issues above, there may be an issue with the panel itself. Please contact Customer Support for assistance.

What are the usage temperature range and precautions for use for the 100 W Panel?

The operating temperature range of the solar panel is -20°C to 85°C (-4°F to 185°F). Please read the instructions carefully before using the solar panel and minimize large bends during use to avoid damage to the battery core. The panels are made of a special composite material, which is lightweight and able to bend to a certain degree,allowing them to be used flexibly on different surfaces of the roof. However, the solar panels are made of monocrystalline silicon wafers, and despite their flexibility, they should not be slammed on the ground during installation and use or stepped on or struck with foreign objects. Do not sit on the surface of the panels and do not bend the panels too far in order to prevent the monocrystalline wafers from breaking and affecting use. Damage caused by human force is not covered under the free warranty.

Do I need to clean the 100 W Solar Panel regularly?

Yes. There can be a lot of dust and foreign objects on the surface of the solar panel after the panel has been used outdoors for a long time, which block the light to a certain extent, reducing the power output. Regular cleaning can help keep the surface of the solar panel clean and free from obstructions and generate a higher power output.However, when cleaning, be careful to wipe the surface with soft materials to prevent hard materials scratching the surface of the panel and affecting the output.

Can I use 100 W Solar Panels together in series?

Yes. Please read the description of in series and parallel connections in the User Manual carefully, paying particular attention to energy storage controller requirements and limitations on solar panel output, so as not to cause solar panels with different currents to be used in series without releasing their power and creating a 1+1

Can I connect 100 W Solar Panels in parallel?

Yes. Connecting panels in parallel increases power through doubling the current. The maximum number of 100 W panels allowed in a parallel connection depends on the controller and energy storage equipment of your recreational vehicle. Please ensure that the energy storage system used in your vehicle supports a higher input current, and you should use wires with a diameter suitable to the output current to securely connect the panels in parallel.

How much power can the 100 W Flexible Solar Panel generate under normal conditions?

This depends first and foremost on weather conditions. Generally speaking, on a clear day with no clouds in the sky, sunlight hitting the panel at a 90° angle usually generates 70 W–80 W of power in the 100 W panel (current light conditions are normally 800–900 W/m2 (74.3–83.6 W/ft2) with a panel temperature of 50°C (32°F) under test conditions. Nominal power ratings are based on 1,000 W/m2 (92.9 W/ft2) in AM1.5 conditions with a panel temperature of 25°C under test conditions. Power output figures close to nominal values were normally observed in the midday sun during the winter).

Does the bend of the 100 W Panel have a large impact on power?

The solar panel can be bent on certain surfaces, but the more the panel bends, the less efficient it is. This is because panel power generation is best only when the entire panel has a consistent light source. When bent, different areas of the flexible solar panel are exposed to different amounts of light, reducing power generation efficiency.

Documentation

EcoFlow 100W Flexible Solar Panel

Specification	Unit
Solar Panel Weight:	Approx.2.3 kg (5.1lbs)
Dimensions:	1055*612*25 mm (41.5*24.1*1.0 in)
Rated Power:	100 W（+/-5W）
Open Circuit Voltage:	20.3 V
Short Circuit Current:	6.3 A
Maximum Operating Voltage:	17.1 V
Maximum Operating Current:	5.9 A
Temperature Coefficient of Rated Power:	-0.39%/°C
Temperature Coefficient of Open Circuit Voltage:	-0.33%/°C
Temperature Coefficient of Short Circuit Current:	0.06%/°C
Maximum System Voltage:	600 VDC（UL）
Maximum Fuse Current:	15 A

100W Flexible Solar Panel

1 x

User's Manual

1 x

Warranty Card

1 x

Click on any accessory below to view the full details and add it to your cart

EcoFlow Suction Cups for Solar Panel

Full details

EcoFlow Solar Angle Guide

Full details

EcoFlow Solar Extension Cable

Full details

EcoFlow Solar to T60i Charging Cable

Full details

EcoFlow Solar Parallel Connection Cable

Full details