Bluetti [DUAL] EP500 4,000W 10,200Wh 120/240V Output + Solar Panels Complete Solar Generator Kit

What’s Included in This Complete Solar Generator Kit?

• 2x Bluetti EP500 2,000W 5,100Wh Solar Power Stations
• Split Phase Fusion Box
• Solar Panels (Choose from 200W Rigid, 200W Portable, 350W Portable Panels)
• 2x Set Of 10 Gauge 50 Feet Solar Extension Cables
• 2x AC Charging Cable
• 2x PV Charging Cable
• User Manuals
• Warranty Cards

BLUETTI EP500 Solar Power Station | 2,000W 5,100Wh

• 5100Wh LiFePO4/Up to 1200W MPPT Solar/Seamless UPS/240V Split Phase
• 5100Wh LiFePO4, 3500+ Cycles to 80% Capacity
• 2000W Pure Sine Wave Output
• Movable Power Station
• In-grid UPS Mode & Flexible UPS Mode(24/7)
• Off-grid Energy Storage
• Multiple Devices Can Be Loaded Simultaneously
• Flexible Recharging Way To Keep Your EP500 Always On
• App Remote Control
• Smart Touchscreen

All-in-one Backup Power Station
The BLUETTI EP500 is shipped with a ground-breaking 5100Wh LiFePO4 battery pack and a 2000W rated pure sine wave AC inverter. This class-leading power station brings you the power to run your entire party, family camping trip, cabin workshops, or even your whole house for a day or two in the event of an unexpected outage. Up to 15 outlet sources allow you to power anything from laptops and air conditioners to your electric vehicles without breaking a sweat.

Safe, Smart, And Continuously Evolving
The advanced Battery Management System and LiFePO4 chemistry bring the EP500 incredible safety and durability. With the built-in dual-core microcomputer and Internet connection, the EP500’s firmware can be upgraded through your internet connection. There is no best, only better!

Seamless UPS Backup
The EP500 will automatically become your home energy source for essential loads when the electrical grid goes down. Unlike gasoline generators, BLUETTI EP500 keeps your lights on and laptops charged without upkeep, fuel, carbon monoxide or annoying noise. Pair with up to 1200W MPPT solar input to rapidly recharge or to keep your appliances running without depleting the onboard battery. Remember when you had to worry about a power outage? Worry no longer, Meet BLUETTI EP500.

How to use the EP500
Designed as a flexible power station to meet various scenarios, the EP500 Series has different usages.

Never Run Out of Power
Suitable for various occasions

Split Phase Bonding Function
For lower power loads of the United States or other regions, BLUETTI is releasing its own "BLUETTI Split Phase Box" to meet the demand on the off-grid power supply for high voltage and high-power equipment. Integrating two EP500 with BLUETTI , you will get higher power, double capacity and output. High power output means you can now run your home air conditioner, clothes dryer, Tankless Water Heater, Ambient Heater, Mine machine, and other high power appliances.

Choose Your Type of Solar Panels

Rich Solar 200 Watt Rigid Solar Panel

Features

• 9 buss bar solar cell configuration
• Mono PERC Technology
• Lightweight anodized aluminum frame
• High Transmission, AR (anti-reflective) Coated Tempered Glass
• Plug and play junction box
• Industry standard quick connect cables work in series or in parallel
• Certified to withstand challenging environmental conditions
• Excellent low light performance on cloudy days, mornings and evenings

Installation

• Easy installation and handling for various applications (high-end off-grid and mobile applications)
• Pre-drilled holes compatible with ground mounts, Z brackets, pole mounts and tilt mounts
• Compatible with on-grid and off-grid inverters

Warranty

• 25 year limited power output

Built-in Components

• RICH SOLAR 200 watt monocrystalline solar panel
• Panel leads (pair): 3 feet each
• IP65 rated waterproof junction box
• IP67 rated waterproof solar connectors
• Bypass diodes built-in the junction box

Bluetti PV200 Solar Panel

• Monocrystalline Solar Cells With Up to 23.4% Efficiency
• Long-lasting ETFE Coating
• Foldable & Portable
• Compatible With Most Solar Generators with MC4 Connectors
• 12-month Warranty

Bluetti PV350 Solar Panel

• Higher Conversion Rate
• Easy Setup & kickstand Included
• Durable & Splash-Proof
• Compatible With BLUETTI AC200P/AC200MAX/AC300/EB150/EB240/EB500
• Foldable & Portable

Videos

In-Grid UPS Setup Guide

1)For non-solar-powered household circuits: An electrician with a professional technician certificate is required to install the in-grid power system, connect the wires of critical equipment from your main electrical box to the BLUETTI UPS BOX. When the power fails, it will automatically switch to EP500 or EP500 Pro for the power supply. The connection method: power grid--home main circuit--BLUETTI UPS box--EP500 or EP500Pro--critical equipment (such as refrigerator, electric light, and server). 2)Solar-powered UPS: a.If the open-circuit voltage of the solar panels is within the specified input range of EP500, they can be directly connected into EP500 or EP500Pro through the MC4 port connectors to build up the UPS system. b.If the open-circuit voltage of your panels exceeds the input limitation of EP500 or EP500Pro, they need to pass the "PV step-down module" to decrease the voltage before connecting into the system. The connection method is solar panels--PV step-down module--EP500 or EP500Pro--critical equipment (such as refrigerator, electric light, and server).

Why is there a limitation on the power of the equipment loaded by the US version of EP500 or EP500Pro in the mobile UPS mode?

When EP500 or EP500Pro is plugged into a home wall outlet, the power output will be limited by the current of the wall plug. The power of output is subject to: If your home's socket features 120V/15A, the equipment carried by EP500 or EP500Pro cannot exceed 1800W. If your home socket features 120V/25A, then EP500 load equipment can be no more than 2000W, and EP500Pro can be 3000W for safety.

Can I change the working mode of EP500 or EP500Pro to work as a mobile UPS after the EP500 connected to the home grid?

Yes, you can. Turn off EP500 or EP500Pro first, and then unplug the cable on it, remind to set the Max. Grid Current to 15A.

What is the UPS switching time?

here are two types of working conditions of UPS for EP500. No delay for online UPS.; 20ms from standby UPS.

How much is the loss of AC and DC?

In standby state: less than 10W, AC_ON & DC_OFF: less than 20W, AC-ON & DC_ON: less than 25W

After the stated 6000 battery cycles, how much capacity is left in EP500 and EP500 Pro?

EP500 and EP500 Pro can maintain above 50% capacity after 6000 cycles.

What's the frequency?

60Hz: US, Canada 50Hz: Europe, UK, Australia Frequency 50/60Hz cannot be switched.

What should Ido if the solar panels on the roof of my house exceed the open circuit voltage requirement?

You can reduce the open-circuit voltage by ordering a BLUETTI PV Voltage Drop Modular. Doesn't require changing the original installation and connection method of solar panels in your house. Through this modular, the open-circuit voltage of roof panels can be matched with the input specs of EP500/EP500Pro

Can I use third party solar panel and what conditions need to be met?

Yes, you can. However, it must meet: 1)Open Circuit Voltage(OCV): EP500: 55-145V/Max.20A, Max.1200W. EP500Pro: dual MPPT，each is 35-150V/Max.12A,1200W Max. (2400W Max. For dual connection). 2)Suitable MC4 connector. 3)We recommend that the solar panels to be connected should be of the same brand.

Are there any restrictions on the use of the 100W USB-C port?

The charging power will work at only 60W at most instead of 30W if the USB-C cable does not have 5A MFI certification.

After the DC port of 12V30A is opened, can the other DC ports be used?

No, for the 30A large-current, the other ports besides 12V/30A RV ports won`t work. In addition, you must cover the rubber plug when the DC is turned on and the 12V/30A port is idle , otherwise it may cause a short circuit if the cable falls in.

Note on the output power of the Split Phase Bonding Function.

1) There is only one AC port marked 4000W/220-240 (or 6000W/220-240) on the Split Phase Fusion Boxes that can power the High-voltage devices. Other 6 AC ports cannot load more than 2000W on EP500 (3000W on EP500Pro). 2) Under Split Phase Bonding mode, the total load power of all AC ports (on the machine and Split Phase Fusion Boxes) can not exceed 4000W for EP500 (6000W for EP500Pro).

If one of the EP500(or EP500Pro) is out of power, does the Split Phase Bonding Function continue to work?

If any one of the two EP500(or EP500Pro) runs out of power, the high-voltage output ports on the Split Phase Fusion Boxes will stop outputting power. The machine which still has the power needs to be set to ”Single Phase” mode manually.

Does the Split Phase Bonding Function apply to one EP500 and one EP500 Pro?

No. Only applicable to units of the same model and specifications. For example, two EP500 or two EP500Pro are recommended. Besides, the Split Phase Fusion Boxes also are different.

Is it waterproof?

Yes. IP65 is rated for junction box. Do not expose the solar panel to rain or snow.

Can I install it on the roof?

No.

What is the difference between the PV200 and SP200?

Under the same condition, BLUETTI PV series solar panels produce more power from limited sunlight.* * Conclusion from BLUETTI Lab, for reference ONLY.

BLUETTI PV200 compatibility.

Most solar power stations on the market, and one PV200 solar panel is ideal for BLUETTI EB55/EB70S/AC50S portable power stations.

Can I use BLUETTI Solar Panel to charge the third-party power station?

Yes, as long as they (1) have MC4 connectors; (2) support the output specifications of BLUETTI solar panels.

How do I choose solar panels for my solar generator?

Review the PV input requirements of the solar generator. Review the output specifications of solar panels. Calculate the total voltage, current, and wattage of solar panels. Consider the solar input connectors.

Can I use different size solar panels?

No. Your solar panels should be the same type and rating from one brand. For example, two PV200 to charge BLUETTI AC200P is acceptable, and one PV200 + one SP200 is unacceptable.

Does the panel have any USB ports you can directly plug into?

No. BLUETTI PV200 only has MC4 connectors.

How do I maximize the efficiency of solar panels?

These steps will help you get the most out of your solar panels: 1. Set up your panels correctly: The orientation as well as the angle it tilts at should be right. 2. Avoid shadow areas: Any amount of shadow will affect solar panel production. 3. Keep your panels clean: Dirt or debris reduces the panel’s efficiency. 4. Don’t get panels too hot: Good air circulation or a cool atmosphere around panels will help.

Is the solar charge controller mode MPPT or PWM?

MPPT.

What should I do when using it?

It is recommended to not have any cover when using.

Is It Waterproof

Yes. IP65 is rated for junction box. Do not expose the solar panel to rain or snow.

Can I install it on the roof?

No.

What is the difference between the PV350 and SP350?

Under the same condition, BLUETTI PV series solar panels produce more power from limited sunlight.* * Conclusion from BLUETTI Lab, for reference ONLY.

BLUETTI PV350 compatibility.

430W Max. via AC and solar charging simultaneously.

Can I use BLUETTI Solar Panel to charge the third-party power station?

Yes, as long as they (1) have MC4 connectors; (2) support the output specifications of BLUETTI solar panels.

How do I choose solar panels for my solar generator?

Review the PV input requirements of the solar generator. Review the output specifications of solar panels. Calculate the total voltage, current, and wattage of solar panels. Consider the solar input connectors.

Can I use different size solar panels?

No. Your solar panels should be the same type and rating from one brand. For example, two PV350 to charge BLUETTI AC200P is acceptable, and one PV350 + one SP350 is unacceptable.

Does the panel have any USB ports you can directly plug into?

No. BLUETTI PV350 only has MC4 connectors.

Why can't my PV200 provide 200W of output power?

Rated 350W is the optimal test result at specific temperature and sunlight. Besides, solar panel production is also affected by panel orientation, dirt and debris, shading from buildings or trees, and other obstructions.

How do I maximize the efficiency of solar panels?

Yes, you can. The solar array must meet the following conditions: These steps will help you get the most out of your solar panels: 1. Set up your panels correctly: The orientation as well as the angle it tilts at should be right. 2. Avoid shadow areas: Any amount of shadow will affect solar panel production. 3. Keep your panels clean: Dirt or debris reduces the panel’s efficiency. 4. Don’t get panels too hot: Good air circulation or a cool atmosphere around panels will help.

What should I do when using it?

It is recommended to not have any cover when using.

Documentation

BLUETTI EP500 Solar Power Station

General
AC Rated Power:	2000W2000W< load< 2500W,2min2500W< load< 3000W,10s3000W< load< 4800W,500ms(peak 4800W)
Net Weight:	≈76kg (167lbs)
Dimensions:	500*300*760mm (22.8*11.8*29.9in)
Battery Capacity:	5100Wh
Battery Cell Type:	LiFePO4
Rated Life Cycle:	3500+ Cycles to 80% Capacity
Charge Temperature:	0°C ~ 40°C (32°F ~104°F)
Storage Ambient Temperature:	0°C ~ 45°C (32°F ~113°F)
Working Environment humidity:	10-90%
Certification:	PSE, FCC, CE, UN38.3, msds, UL, SAA and ROHS
Warranty Period:	60 Months
Color:	Superior Grey, Elegant White

Input Specs
AC Input:	600W Max, 100-264VAC
PV Input or T500 Input:	1200W Max, 55-145VDC, 20A

Output Specs
USB-C:	1*100W
AC:	220-240VAC*3, 100-120VAC*4
USB-A:	2*Quick Charging, 36W Total, 2*5VDC, 3A Total
Cigarette Lighter:	1*12VDC, 10A
RV (Aviation Port):	1*12VDC, 30A
DC 5521:	2*12VDC, 10A Total
Wireless Charging Pad:	2*5/7.5/10/15W

BLUETTI PV200 Solar Panel

Power
Power:	200W
Lamination:	ETFE (Ethylene tetrafluoroethylene)
Cell Type:	Monocrystalline Silicon
Cell Efficiency:	Up to 23.4%
Voltage at Max Power(Vmp):	20.5V
Current at Max Power(Imp):	9.7A
Open Circuit Voltage(OCV):	26.1V
Short Circuit Current(Isc):	10.3A

General
Connector:	Standard MC4 Connector
Weight:	16.1lbs (7.3kg)
Dimensions (Unfolded):	23.2 × 89.2in (59 × 226.5cm)
Dimensions (Folded):	23.2 × 24.8inch (59 × 60cm)
Operating Temperature:	14-149℉ (-10-65℃)
Best Working Temperature:	77℉ (25℃)
Cable Length:	118in (3m)
Certifications:	FCC, CE, ROHS
Warranty:	12 Months (Enter to learn more about BLUETTI warranty policy)

BLUETTI PV350 Solar Panel

Power
Power:	350W
Lamination:	ETFE (Ethylene tetrafluoroethylene)
Cell Type:	Monocrystalline Silicon
Cell Efficiency:	Up to 23.4%
Voltage at Max Power(Vmp):	37.5V
Current at Max Power(Imp):	9.2A
Open Circuit Voltage(OCV):	46.5V
Short Circuit Current(Isc):	10.8A

General
Connector:	Standard MC4 Connector
Weight:	30.6lbs (13.9kg)
Dimensions (Unfolded):	35.6 × 94.4inch (90.5*240cm)
Dimension (folded):	35.6 × 24.1 ×2.5in (90.5*61.3*6.5cm)
Operating Temperature:	14-149℉ (-10-65℃)
Best Working Temperature:	77℉ (25℃)
Cable Length:	118in/ (3m)
Certifications:	FCC, CE, ROHS
Warranty:	12 Months

Rich Solar Mega 200 Watt 12 Volt Solar Panel

Specification	Unit
Maximum Power(Pmax):	200W
Maximum Power Voltage(Vmp):	20.4V
Maximum Power Current(Imp):	9.80A
Open Circuit Voltage(Voc):	24.3V
Short Circuit Current(Isc):	10.2A
Maximum System Voltage(Vmax):	1000VDC
Temperature Range:	-40°C ~ 90°C
Max Series Fuse Rating:	20A
Weight:	26.5 lbs
Dimensions:	58.7 x 26.8 x 1.4 in

EP500

2 x

Solar Panels

*Select type & quantity

Solar Extension Cable

1 x

Split Phase Fusion Box

1 x

PV Charging Cable

1 x

AC Charging Cable

1 x

User's Manual

1 x

Warranty Card

1 x